|
[Home]
[Fax or Email Order]
[Gift Certificates]
[Contact Us]
[Customer Service]
[Hot Tub / Spas]
[Spa Chem Compare]
[Spa Skirting]
[Steps/Bars etc...]
[Spa Topside Control]
[Spa Vents/Drain]
[Pool Accessories]
[Pool Chemicals]
[Pool, Spa, Gate Alarms]
[Pool Gate/Door Alarms]
[Pool Lights]
[Pool Liners]
[Pool Open/Close]
[Pool Pumps & Filters]
[Pool/Spa Heaters]
[Pool Winter Covers]
[Water Chemistry]
[Monthly Specials]
[Specials & Gifts]
[Air Valves]
[Diverter Valves]
[Filter Accessories]
[Filters/Other]
[Fuses]
[Hose Bibbs]
[Hot Tub Care]
[Outdoor Mix/Match]
[Plumbing]
[S'fty Suction Switch]
[Spa Accessories]
[Spa Chemicals]
[Spa Covers/Access.]
[Spa Electrical]
[Spa Heater Packs]
[Spa Jets]
[Spa Lighting]
[Spa Manifolds]
[Spa Open/Close]
[Spa Owner Manuals]
[Spa Ozonators]
[Spa Pillows/Filter Lids]
[Spa Pillows/Filter Lids]
[Spa Pressure Switches]
[Spa Pumps]
[Spa Repair Links]
| |
Spa Pumps
& Accessories
(BOTTOM)
If there is something you need & don't see...Contact
Us!
SPA PUMPS
|
click image to enlarge |
click image to enlarge |
|
Jet Pump for Maax European Nahani -
2.5 HP
220 Volt
50 Hz
2 Speed
48 Frame
2" Inlet / 2"
Outlet
PART #106772
|
Jet Pump for Savannah Tristar - 1 HP
2 Speed
110 Volt
48 Frame
2" Inlet / 2"
Outlet
PART #104451
|
(TOP) (BOTTOM)
|
click image to enlarge |
click image to enlarge |
|
Jet Pump for Savannah
Mirage, Sunset, Laguna, Aspen, Nahani and other MAAX SPA Models - 4 HP
ALSO FOR: Maax
1997 Infinity Atlantis LS, Mariner LS, Nassau LS, Nautilus LS, Vesuvius LS
and, 1997 Lifestyle Cnstellation Spas
220 Volt
- 2 Speed - 56Y Frame - 2" Inlet / 2"
Outlet
PLEASE NOTE: THIS PARTICULAR PUMP #200017
IS NOW
NO LONGER AVAILABLE, nor made. IT IS BEING REPLACED BY THIS PUMP #103699 WHICH IS A
3HP BUT SAME RATING as ORIGINAL 4HP PUMP
#200017 (operates as a 4HP). THIS IS THE ONLY REPLACEMENT PUMP AVAILABLE FOR
THESE SPAS, THERE ARE NO OTHERS. PLEASE NOTE THAT THIS PUMP IS AN
IDENTICAL REPLACEMENT AND WILL OPERATE AT SAME HP AND RATE AS THE ORIGINAL!
You will also need to order part #107033 which is the
gasket & adapter to retrofit this pump if you have 3" plumbing to plumb
down to 2" This pump comes is for 2" plumbing.
This is also replacing Pump #104457, which is no
longer made. You will
notice no performance difference from that pump to this pump. You will
also need to order part #107033 which is the gasket &
adapter to retrofit this pump.
NOTE: This pump is for 2" plumbing. If you
have 3" plumbing, you will need to order an adapter to accomodate this.
Click here for Adapter #107033
PART (#200017)- NEW #103699 -
$625.00
|
Jet Pump for Savannah Mirage - 5HP
or
Maax Nahani (US)
THESE MODELS USING THIS PUMP CAN ALSO BE
REPLACED WITH PART ←#200017 (CLICK HERE....)
5 HP
220 Volt
60 Hz
2 Speed
48 Frame
2" Inlet / 2"
Outlet
PART #200018 -
$600.00
|
(TOP) (BOTTOM)
|
PUMP,2.5 HP - 2 SPEED
For Maax Infinity 2001-02, Spa Depot 2002,
Premium Elites 2003 - 05 and Elite-Marina 2003- 05 Spas
2 SP
230 V
60HZ
56F
PART #103698 -
$516.00
|
PUMP, 2.0 HP, 2 SP
For Maax Infinity 1999-2002 (certain models),
'99 LifeStyle Destiny,
'99 & prior Park Avenues and Savannah Albany Spas
PUMP,2.0 HP,2 SP,230V,60HZ, 56F,
AOS,BLUE
PART #103703 -
$499.00
|
(TOP) (BOTTOM)
|
#104439 |
|
PUMP 5 HP - 2 SPEED
PUMP, 5.0HP, 2SP, 230V,
XXHZ, 48F MKT-
For Maax Spa Depot Elites 2001-2002 (certain
models), '03 Elite Marina (certain models),
'03 Premiums Spas (certain models)
PART #104439 -
$632.00
|
Jet Pump
4.5 HP / 2 Speed
PUMP, 4.5HP, 2SP,
230V, 60HZ
For Maax
1997 Infinity Atlantis LS, Mariner LS, Nassau LS, Nautilus LS, Vesuvius LS
and, 1997 Lifestyle Cnstellation Spas
PART #104457
THIS PUMP IS NO LONGER AVAILABLE.
IT IS BEING REPLACED BY #103669. ALTHOUGH A
DIFFERENT HORSE POWER, YOU WILL NOT NOTICE A PERFORMANCE DIFFERENCE WITH
THIS NEW PUMP. YOU WILL NEED TO ORDER PART #107033
WHICH IS THE GASKET & ADAPTER IN ORDER FOR THIS TO RETROFIT.
|
(TOP) (BOTTOM)
|
click image to enlarge |
Waterway Jet Pump
4 HP / 2 Speed / 56 Frame
4 HP / 2
Speed / 56 Frame
For
some Maax '99 - '01 Infinitys, '00 Lifestyles and the Savannah; Aspens,
Albanys & Monaco Spas
PART #104464 -
$225.00
|
(TOP) (BOTTOM)
|
click image to enlarge |
Jet Pump for '98 Lifestyles, '97
Infinities - 4.5 HP - 220V
4.5HP, 1SP, 230V, 60HZ, 48F , 2"
Connections- WATERWAY
PART #104462 -
$399.00
|
(TOP) (BOTTOM)
Jet Pump for '98 Lifestyles, '97
Infinities - 1.5 HP - 110 V
1.5HP,
2SP, 110V
12:00 Discharge (can be rotated)
Amp Plug (if you need a JJ Plug, then swap cord
from old motor to this one)
PART #101293 -
$485.00
|
(TOP) (BOTTOM)
|
click image to enlarge |
|
Waterway - Hi-Flo Spa Pump
4HP,
48-Frame
Motor, 2-Speed, 60Hz, 230V,
2" Suction / 2" Discharge
THESE PUMPS ARE USUALLY USED WITH
CAL SPAS; BUT WILL WORK WITH MANY OTHER MAKE AND MODEL SPAS
This is
a High Flow Spa Pump from Waterway. It has side discharge, and 2 inch
plumbing connections.
Waterway - Hi-Flo Spa Pump Features:
High volume side discharge efficiency.
2" inlet and outlet.
Wet end can be rotated for easy installation.
Large 6.5" diameter wet end for higher head pressure.
Waterway - Hi-Flo Spa Pump Specifications:
|
Manufacturer # |
Horsepower |
Volts |
Amps-Hi |
Amps-Low |
Flow Rate |
2-Speed |
|
342162110 |
4 |
230 |
12.0 |
3.5 |
175 |
Yes |
PART #3421621-10 -
$425.00
|
(TOP) (BOTTOM)
click image to enlarge |
|
#101333 |
|
Jet Air Blowers UNIVERSAL (No
HEAT)
FOR USE WITH
MAAX
Lifestyle Spas, years 1997 - 2000; Park Avenues, and Infinity's, years 97,
99 - 2001 and most other spas...
You may have to use your plug off your old
blower to retrofit this new pump
BLOWER, 1.5HP, 240V, 60/50HZ, W/10'PLUG AMP
REPLACES BLOWERS #104488 and #104490
PART #101333
$182.99
|
|
(TOP) (BOTTOM)
click image to enlarge |
 |
|
#104489 |
#106125 |
|
Jet Air Blowers
FOR USE WITH ANY
SPA MODEL
1-1/2 HP
220 Volt
Heated or No Heat
PART #104489 Universal -
HEATED BLOWER,
1.5HP, 240V, 60HZ, HEAT-300 P3
$255.00
PART #106125 Waterways -
NO HEAT
-
BLOWER, 1.5HP, 220V, XXHZ,
7001522485
$235.00
Note: If the cord on this
blower does not match yours, you must use old cord from your old blower
whereas the cords are not available separately.
|
|
(TOP) (BOTTOM)
|
 
|
 |
   |
|
Tiny Might Circular
Pump RETRO-FIT Kit / Infiniti
RETRO-FIT KIT for BELL & GOSSETT
(Bell & Gosset no longer available for Maax
Infinities- Must replace with this kit
You need a
retro-kit
if you are replacing your current pump with a Tiny Might Pump. You
will not need this kit if you are replacing a Tiny Might.
For all Maax Infiniti Spa Models as well
as other models.
Please
contact us for
FURTHER information for Retro Fit Kit Exchange.
Available in 110 Volt or 220 Volt.
KIT INCLUDES:
1 - Tiny Might
Pump
2 - 3 Feet of
1" Flex hose (6 Feet total)
2 Female Unions
2 - 1" Couplers
2 - 1" 45
degree Elbow Couplers
1 - 1" 90
degree Street Ell
Part #104452-RETRO
|
Tiny Might Circular
Pump/Infiniti
For all Maax Infiniti Spa Models as well
as other models.
You need a
retro-kit
if you are replacing your current pump with a Tiny Might Pump. You
will not need this kit if you are replacing a Tiny Might.
Please
contact us for
FURTHER information if needed.
Available in 110 Volt or 22
0 Volt.
Part #104452
See above item for Bell & Gossett RETRO-FIT (Bell & Gosset
is no longer available for Maax Infinities- Must replace with Retro-kit
above!)
|
|
$230.00
Discounted Price for entire
kit!
|
$205.00
|
(TOP) (BOTTOM)
|
click image to enlarge |
|
Laing Circular Pump/Maax
PUMP, CIRC -
(230V) 220V
For all Maax Spa Models
Please
contact us for
FURTHER information if needed.
Available in (230) 220 Volt only.
50/60HZ
Part #106017 (30420444)
|
(TOP) (BOTTOM)
|
click image to enlarge |
|
Circ-Master HP Pumps - Circulation
Pump
MAAX SPAS
True, continuous rated horsepower of 1/15
1 1/2” inlets and outlets
48 frame
1 speed
Side discharge (can be rotated to 12:00, 9:00 or 3:00 position)
Permanently lubricated ball bearings for extended life
Carbon-graphite, self-lubricating seal designed for continuous
duty operation
Quiet running |
Part #104440
$350.00
|
(TOP) (BOTTOM)
|
click image to enlarge |
|
Circ-Master - Circulation
Pump
Sunrise Spas
|
True, continuous
rated horsepower of 1/15
1 1/2” inlets and outlets
48 frame
1 speed
12:00 discharge (can be rotated to 12:00, 9:00 or 3:00 position)
Permanently lubricated ball bearings for extended life
Carbon-graphite, self-lubricating seal designed for continuous duty
operation
Quiet running
|
Part #02593002-2500-U
Return Up (12:00) - $350.00
|
(TOP) (BOTTOM)
THREADED ADAPTERS
|
#107033
2 1/2 IN. TO 2 IN. BUTTRESS, THREADED (for use
with Pump #200017 to #103669)
(Go from 3" to 2" plumbing)
|
#50100120
2" x 3" Buttress Threaded Adapter & O-Ring
(Go from 2" to 3" plumbing)
|
#415-6010
2" x 2-1/2" Buttress Threaded Adapter &
O-Ring
(Go from 2" to 4" plumbing) |
ADAPTERS / BUTTRESS, THREADED
for use with Pumps
For use with Pumps
(wet ends) to change plumbing size
PART #107033 -
$8.99
PART #50100120 -
$9.25
PART #415-6010 -
$9.50
|
(TOP) (BOTTOM)
JET PUMP SUCTION ACCESSORIES
|
 |
 |
 |
 |
 |
 |
|
click images to enlarge |
click image to enlarge |
click images to enlarge |
|
Jet Pump Suction 3/4" Floor Drain
Assembly with Cover
For Maax Spas
Lifestyle '97-99
Infiniti - '97-'00
Also Universal - Fits Many other Spas
(screws
included)
PART #104211 -
$20.99
Part #104211C (Cover Only) - $12.99
|
Jet Pump Suction
Cover Only
For above Jet
Pump Suction
For Maax Savannah Spa's
Also Universal - Fits Many other Spas
|
Take cover off and look underneath to determine
which cover you need! |
click image to enlarge |
|
click image to enlarge |
|
Type 1
"T" Rib underneath with 2 side screw holes
(Year 2000
or newer spas) |
|
Type 2
"I" Rib underneath with 2 side screw holes
(Older Spas
1999 or older) |
(screws not included)
PART #104334CAP - Type 1 -
$12.99
PART #200590CAP - Type 2 -
$12.99
|
Jet Pump Suction - 2" Straight Gray
100 GPM
For Maax Spas
Lifestyle '97-99
Infiniti - '97-'01
Universal - Fits Many Spas - Used for Spa drain Circulation Pump Suction
Fitting
(screws
included)
PART #100770 - $17.00
|
Super High Flow Suction 200 GPM
For Maax Spas
Lifestyle '99
Infiniti - '99-'02
Savannah Models
Spa
Depots -'01-'02
Elite-Marina-'03-'05
Premium - '03-'05
Nahanni-'04-'05
(screws
included)
PART #104334 - $24.99 |
(TOP) (BOTTOM)
KNIFE/GATE VALVES
|
click image to enlarge |
click image to enlarge |
click image to enlarge |
|
1-1/2" - Non-Threaded |
2" - Threaded |
Gate Keeper |
|
Knife Valves
Available in 1-1/2" & 2"
PART #100518
Diagram:
|
A→ ↑B
click image to enlarge |
click image to enlarge |
click image to enlarge |
|
A
- Non Threaded - 1-1/2 Inch |
B
- Threaded - 2 Inch |
|
Gate Keeper
Keeps Valves open on Knife Valves
PART #200483
←See Diagram under Knife Valve to determine
part
|
(TOP) (BOTTOM)
UNIONS/NUTS
|
click image to enlarge |
click image to enlarge |
 |
click image to enlarge |
|
Pump Tail Piece Slip - 2"
Male Threaded
PART #MALETAILPIECESLIP2
|
Female Pump Unions Kits
Female
1 or 2"
Fits Suction
and/or Returns
Note for Tiny
Might Pumps:
1" = (Tiny Mite Pump Union) Tiny Might Pump
Union 1” Tailpiece Slip and O-ring
PART #104267
-1" =
$10.00 (set of 2)
PART #104229
-
2" =
$10.00 (set of 1) |
(TOP) (BOTTOM)
WET ENDS & ACCESSORIES
|
click image to enlarge |
|
Waterway Super Flow Wet End
2HP,
3HP, 4HP, & 5HP
(CONTACT FOR OTHER HP'S)
For Maax Spas
+ Others
48 or 56 Frame
(look on pump label)
2" Return &
2" Outlet
and
other configurations
(56 Frame = 2-1/2" Inlet)
Note:
You
must replace complete Wet End if seal leaks! There are NO replacement
seals!!!
|
|
PART #106657
2HP
$110.00
PART #106658
3HP
$110.00
PART #106659
4HP - 56F
$122.00
PART #92770715 4HP-Special (**** SEE NOTE BELOW
FOR THIS WET END!)
$150.00
PART #106660
5HP - 48F
$122.00
*****PART
#92770715
4 HP / 56 Frame
(Special Wet End!)
Fits existing Aqua-Flo pumps with Emerson
Motors-56 Frame / 6.1
(For Savannah's
Sunset, Laguna,
Albany or Tremblant Spa Models
(For
Emerson Motors
Only 6.1)
(Motor has number
1563 on the label)
56Frame)
Please
contact us with any questions!
Please answer
all these questions before adding to cart to be sure to get the correct Wet End!
USE THESE IMAGES TO HELP FIND IF YOU
HAVE A SPECIAL WETEND WITH #1563 ON PUMP!
 |
 |
 |
|
Click on images above to enlarge-
Samples of labels on pumps to find information |
|
(TOP) (BOTTOM)
|
click image to
enlarge |
|
Front |
Back |
|
|
click image to enlarge
2" Combo Gasket-Flat with O-Ring
All-In-One |
|
Waterway Wet End Face Plate
Face Plate ONLY
for ←Wet End
PART #310-1440 -
$49.99
|
Waterway Wet End Barb Adapter
1/4" MPT X 3/8"
PART #104296 -
$4.99
|
2 " Gasket
(O-Ring) for Wet End
This part is for the inside of female union on Wet End (hooks onto pump).
NOTE: This is NOT a replacement for a
leaking seal.
Leaking Seals are
NOT
replaceable, you must replace complete Wet End if seal leaks!
PART #100632
-
$3.99 |
(TOP)
|
