ALL YOUR
POOL & SPA NEEDS AT DEEP DISCOUNT PRICES!
PLEASE
NOTE: YOUR SHOPPING CART IS IN A POP UP WINDOW. TO SEE THIS CART,
YOU MUST ALLOW POPUPS FOR THIS SITE
(CLICK ON TOOLS ABOVE ADDRESS BAR TO ENABLE POP UPS)
PLEASE NOTE:
WE WILL BE CLOSED FROM
WEDNESDAY, SEPTEMBER 8TH, 2010 THRU WEDNESDAY, SEPTEMBER 22, 2010. ANY
ORDERS PLACED DURING THIS TIME PERIOD, WILL NOT BE FULLFILLED OR SHIPPED UNTIL
THURSDAY, SEPTEMBER 23, 2010. ALL EMAILS WILL BE
ANSWERED AS RECEIVED IN A TIMELY FASHION DURING THIS TIME PERIOD.
PLEASE BE SURE TO PLACE YOUR ORDERS NO LATER THAN 12:00 PM EST, TUESDAY,
SEPTEMBER 7, 2010 IN ORDER TO BE SHIPPED BEFORE SEPTEMBER 23, 2010.
CHECK OUT OUR NEW
SPA CLEANING WIPES! MAKES CHANGING YOUR WATER AND CLEANING THE SPA
OUT A WHOLE LOT EASIER AND QUICKER!
click here!
As you begin caring for your spa or hot tub, it's
important to realize that a spa is different from a pool and, therefore, spa
water needs to be treated differently than pool water.
In a spa or hot tub, the
water is heated between 98-104°F - a temperature that is much warmer than a
swimming pool water. In addition, the ratio of people to the amount of water
in a spa is much greater. For example, having four people in a hot tub is
equivalent to having 300 people in an average backyard pool.
The heated water and higher
bather load ratio can result in increased water problems due to a great deal
of residual soaps, deodorants, perfumes, natural body oils, and other
cosmetics. In order to avoid these problems, it's very important that you
use products specifically formulated for spa or hot tub we recommend
throughout this website.
NOW HERE! A
WHOLE NEW COMPLETE POOL&
SPA CHEMICAL LINE!
Click
HERE to Check it out!
HTH - Leak Sealer for Spas, Hot
Tubs, Pools & Fountains 32 oz Bottle
NEW
LOWER PRICE!!!
Features:
STOPS LEAKS IN
SPAS, HOT TUBS, POOLS AND FOUNTAINS.
DUAL ACTION
FORMULA STOPS LEAK THEN SEALS IT WITH A WATERPROOF GLAZE
1 QUART TO
17,000 GALLONS FOR POOLS
1 QUART TO SPAS,
HOT TUBS AND FOUNTAINS
Fix Cracks
Without Draining
Dual-action formula first stops and the seals leaks with a waterproof glaze.
Directions:
1. Remove filter cartridges or DE elements (by-pass filter media completely
with sand filters) before adding Leak Sealer. (Filtration removes Leak
Sealer
from the water.)
2. Turn pump on. Add to areas where leak is suspected; or if not known, add
directly to skimmer or as close to main drain as possible.
3. Add 1 full qt. to spa or hot tub. Add 1 qt. per approximately 17,000
gallons of pool water (15 ft x 30 ft. pool).
4. Circulate water until leak is thoroughly sealed
Please Note: Leak Sealer will seal most minor leaks. However, user assumes
all responsibility for use of this product. It is sold without warranty
expressed or implied.
Product #50791
$17.99
$9.99
Leisure Time Leak Seal for Spas, Hot
Tubs, Pools & Fountains - 32 oz Bottle
NEW
LOWER PRICE!!!
Leak Seal seals minor leaks in
hot tub or spa and pool plumbing.
Features
Easy To Use 32 oz Size
Proven Effective
Fixes Most Minor Leaks
Use in Spas, Hot Tubs, and Swimming Pools
Keep out of the reach of children!
First Aid
External: Flush with fresh water for 15 minutes
Internal: Drive large quantities of water. Call physician immediately
Eyes: Wash with water for 15 minutes. Get medical attention immediately
1. Remove filter cartridge, grids from DE filter, or media from other types
of filters.
2. Add 1/3 of this bottle for spas or entire bottle for pools as close as
possible to skimmer or main drain.
3. Turn ON only the circulation system. DO NOT TURN ON HEATER OR AIR BLOWER.
4. Run recirculation systems for 5 hours for spas and 10 hours for pools.
5. Refill spa or pool to proper level and let standing long enough to
determine if leak is sealed.
6. If leak is sealed, drain the spa and refill. For pools, normal operation
can be resumed.
7. If leak is not sealed, repeat steps 1-6.
Please Note: Leak Seal will seal most minor leaks. However, user assumes all
responsibility for use of this product. It is sold without warranty
expressed or implied.
Nothing is worse than getting into a spa, turning on
the air blower or jets, and being covered with sticky foam. One squirt of
Defoamer kills all spa water surface foam. A must for any spa!
Anti-foaming agent developed for
heated and aerated water. A special non-oily blend of silicone compounds.
Designed and developed to easily dispersefor efficient defoaming of spa
water.
A blend of non-oil, anti-foaming agents that eliminate foam in any type of
sanitized spa.
Quickly eliminates foaming in pools, spas and hot tubs.
Compatible with other water treatment chemicals.
Use it whenever persistent foaming is a problem, and to prevent new foam
from developing. Instantly eliminates foam in hot tubs.
NOTE:
Whenever
you use a defoamer, you should ALWAYS use it in conjunction with a
spa clarifier or
scum out!
Club Pro Defoamer 16 oz.
Nothing is worse than getting into a spa, turning on
the air blower or jets, and being covered with sticky foam. One squirt of
Defoamer kills all spa water surface foam. A must for any spa!
Anti-foaming agent developed for
heated and aerated water. A special non-oily blend of silicone compounds.
Designed and developed to easily dispersefor efficient defoaming of spa
water.
A blend of non-oil, anti-foaming agents that eliminate foam in any type of
sanitized spa.
Quickly eliminates foaming in pools, spas and hot tubs.
Compatible with other water treatment chemicals.
Use it whenever persistent foaming is a problem, and to prevent new foam
from developing. Instantly eliminates foam in hot tubs.
NOTE:
Whenever
you use a defoamer, you should ALWAYS use it in conjunction with a
spa clarifier or
scum out!
A blend of organic polymers that have many positive
charges along its chain. The dirt is attracted to the SPA BRITE and is
neutralized. The small particles can then combine to form large enough
particles to be trapped by your filter.
Clears cloudy water
Increases filter performance
Won't effect chemical balance
This product represents the latest generation in water
clarification.
Spa owners will find filters last longer and operate better.
It is not necessary to adjust pH of the spa water
before or after using this product. The performance of this clarifier
is not affected by chlorine. This product may be applied while the spa
is in use.
Product manufacturer may vary from pictures.
NOTE:Whenever
you use a defoamer, you should ALWAYS use it in conjunction with a spa clarifier or
scum out!
Effectively eliminates cloudy
water, scum build-up, waterline ring, clogged filters, eye irritation and offensive
chemical odors.
Also reduces maintenance, the use
of harsh chemicals, extensive scrubbing and water change out.
A natural
enzyme formula that is non-toxic and hypo-allergenic.
100%
biodegradable, and does not increase Total Dissolved Solids.
Non-irritating to eyes, ears, skin and mucous membranes.
This product
is so harmless it does not require a warning label!
Cuts cleaning and scrubbing by
50% or more and saves money too!
Also a continuous cartridge
filter cleaner! Since scum and oil don't build up, soaking with
nasty chemicals and acids is rarely required. To clean filter,
just rinse with a hose. Saves you a messy job and money too!
SPA PERFECT contains natural
enzymes which cause organic contaminants such as suntan oils, cosmetics,
body oils and wastes to biodegrade gently.
Tow or three
applications of SPA PERFECT will completely eliminate the organic
contaminants that cloud sp/hot tub water, form scum and odors and clog
filters and lines.
Directions for use:
Use 1 ounce per 100 gallons of spa water per week. Use
twice per week during periods of heavy use.
Natural enzyme formulation reduces spa maintenance by
breaking down oils, lotions and organics that can cause odors, scum lines,
and cloudy water. 100% biodegradable and safe for the environment.
Keeps water sparkling clean
Removes and prevents oil build up in filter and at
tile line
Will not effect water balance
No waiting required
Product manufacturer may vary from pictures.
NOTE:
Whenever
you use a defoamer, you should ALWAYS use it in conjunction with a spa clarifier or
scum out!
Water contains a lot of unwanted minerals. Whether you
have well water or "city water", metals can cause big problems with spa
water when mixed with Bromine. Just add some of this powerful Demineralizer
and it will neutralize all the metals and minerals present in the spa water
!
Spa Metal Gon™
TO PROTECT EQUIPMENT FROM SCALE, STAINS
AND RUST
Prevents metal staining of spa surfaces
by sequestering iron, copper and other minerals.
Excellent Protection of all parts and
surfaces ins spa against corrosion! Corrosion is caused by minerals
that are found in your spa water. When the metal parts of your
filtration and heating systems are not protected with Metal Shield, the
resulting corrosion will cut years of use of the life of this equipment.
NOTE: Before adjusting water chemistry, add a
sequestering agent such as SPA METAL GON™
to prevent staining of spa surfaces.
Alka-Up
raises the total Alkalinity of the spa/hot/tub water preventing any
corrosion to tiles or spa equipment. Alka-Up will prevent erratic
changes in the pH level of warm water.
Alka-Up
will keep the Bromine or Chlorine disinfectant working more efficiently in
the spa/hot tub water.
PH decreaser - an acid. Lowers the pH and alkalinity of
water.
PH DECREASER lowers the pH of water in spas and hot tubs.
The pH should be maintained at 7.2 to 7.6 as measured
by an accurate test kit. PH DECREASER is a dry granular acid which is safer
and easier to use than liquid acids.
DIRECTIONS FOR USE
Read entire label and use strictly in accordance with precautionary
statements and directions.
Use container cap as convenient measurer. One level capful holds
approximately 1/2 ounce of pH DECREASER. Use a reliable pH test kit and keep
water pH between 7.2 and 7.6. An Acid Demand Test (part of many quality test
kits) directly estimates amounts of this product needed to lower pH to
7.2-7.6, or, when Total Alkalinity of water is in balance. See chart listed
on bottle for usage per pH level.
Sprinkle pH DECREASER into the water when the spa is out of service.
Let pump circulate the water for 30 minutes. Retest pH. Repeat treatment, if
necessary. Do not add near metal fittings nor allow pH to drop below 7.2. Do
not allow undissolved lumps to remain on the spa surface. Break lumps up by
brushing or other means of agitation.
Convenient, granular product that raises the pH of spa
and hot tub water.
Granular Sodium Carbonate. Raises pH and can slightly increase total
alkalinity. Helps prevent corrosion of metal equipment.
CARE TIP:
Never Check the pH when the high-speed jets or bubbles are activated. The
"bubbling" of the spa will cause a "false high" pH reading for up to 2
hours. ALWAYS check the pH when the spa has been out of use for several
hours for an accurate reading.
Dosage/Application:
Read & follow all label instructions. If pH drops below 7.2, add 1 oz per
500 gallons of water. Broadcast directly into spa with the circulation
running with the aeration off. Retest pH after about 6 hours. If controlling
pH is a continual problem, test for total alkalinity & adjust as necessary.
(*This is not the same SPA PERFECT as the Products listed a few items above this item...This is a different chemical that does something different than this chemical here....)
FOR SPA'S...
Eliminates pH fluctuation
Maintains proper pH!
Easy to use without worry of overdose
Spa Perfect
or pH Anti-drift eliminates
fluctuating pH. Use only one dose each time the spa is filled.
Spa Perfect or pH Anti-drift was developed to help perfectly maintain and
balance pH in your spa or hot tub. Lasts until spa is drained and
refilled (approx. 2 to 4 months.) Enough for 500 gallons.
Reduces maintenance time and adjustment chemical usage.
32 fl. oz.
Product notes:
Add after adjusting your spa's Total Alkalinity and pH. Spa
Perfect or pH Anti-Drift begins working immediately to lock pH of the spa into
the appropriate range.
Filter Cleaner is a product designed to remove
oil, grease, dirt, and soap from all makes of cartridge filters. It is
composed of an acidic solution which helps to break down organic and
inorganic mater that accumulates in cartridge filters. Filter
Cleaner Works well with any type of cartridge filter.
Application
Soaking
For cartridges and removable D.E. (diatomaceous earth) elements:
Remove elements and rinse with clear water.
Prepare a solution by adding 1 quart of Filter Cleaner to 2 gallons of
warm water in a large plastic bucket or garbage can. Prepare enough solution
to cover filter. For heavily soiled cartridges add 2 quarts of Filter
Cleaner to the 2 gallons of water.
Place the filter cartridge or D.E. element in the cleaning solution and
allow soaking overnight (12 hours). Lightly soiled elements can be soaked
for as little as 4 hours.
Rinse filter thoroughly with clean water and replace.
Filter elements should be allowed to dry before installing in the filter
unit if they are going to be stored.
Backwashing To improve backwash and to clean sand and D.E. filters:
Turn off pump and set valves to backwash position.
During backwash, slowly add Filter Cleaner to skimmer.
*Use 1 quart for sand filters up to 2 feet in
diameter or D.E. filters up to 1 foot in
diameter.
*Use 2 quarts for larger filters.
Backwash until the backwash water is clean and no foam is visible.
Return filter to normal operation.
To combine backwashing and soaking period:
Backwash for up to 1 minute and leave valves in backwash position.
Fill the filter tank with a solution of Filter Cleaner in water: Either
prepare the solution as above (see “Soaking, #2) and use the pump to feed
the solution through the pump strainer (requires 7 to 20 gallons of water)
or add Filter Cleaner directly to the filter or directly through the
skimmer.
* Use 2 quarts for sand filters up to 2 feet in
diameter or D.E. filters to 1 foot in diameter.
* Use 4 quarts for larger filters. Allow the
filter to soak several hours (12 hours) or
overnight.
Next day, backwash until effluent water is clear (no foam), then return to
normal operation.
Dosage / Frequency
Use as needed. See detailed instructions above
(“Application”).
Safety Read and follow all label directions and warnings carefully.
Useful Tips 1 pint to 4 gallons of water will clean up to 55 square feet of filter area.
Add cartridges to solution and soak for 3-6 hours, rinse with high pressure
hose nozzle.
Product Details 1 quart
Liquid product
Remove oil, grease, dirt, and soap from all makes of cartridge filters.
Contains: Citric Acid, 2-Butoxy Ethanol,
Hydroxyethanedisphonic Acid Poly (oxy-1,2-ethanediyl), alpha-(nonylphenyl-omega-hydroxy)
Product manufacturer may vary from pictures.
#35030
(16 oz)
#71948 (1 Qt.)
Spray 'N' Rinse 1 pt.
Instant Cartridge
Cleaner!
SPA, POOL & D.E. FILTER
ELEMENT/CARTRIDGE CLEANER
Spray 'N' Rinse Filter
Cartridge Cleaner for Pools and Spas and D.E. filter elements is a product designed to remove
Minerals and other debris from filter element. It removes Oils,
Minerals and Scales. Non-Soak formula and extends the
life of your filter. Spray 'N'
Rinse Filter Cartridge Cleaner Works well with any type of cartridge filter.
DIRECTIONS FOR USE:
Remove D.E. or cartridge filter element from filter
casing. Rinse off loose material on element. thoroughly saturate
filter element with water. Spray cleaner over total surface area of
filter element for maximum effect. Let set 3-6 minutes. Rinse
element THOROUGHLY with hose (foaming in pool may occur if filter element
is not completely rinsed). Especially heavy soiled filter element may
need second application. Removes scale, minerals, dead algae, body oils
and other debris.
Spa Algaecide / Remover & Preventer
16 oz or 1 qt.
Our highly effective algaecide for spas and hot tubs. Spa Algaecide is a non-foaming formula.
Used to control the growth of algae in swimming pools,
exterior spa, whirlpools, hot bus, and decorative fountain and ponds that do
not contain fish.
Directions
Initial Treatment
For visible algae growth or slimy interior surface, add 6 to 8 fl. oz. of
algaecide per 500 gallons of water.
For maximum effectiveness, spas containing heavy growth of algae should be
drained and cleaned prior to treatment.
Maintenance After initial treatment, to keep your spa free of algae growth, add 1
to 2 fl. oz. per 500 gallons of capacity every 5 to 7 days.
This algaecide can be used in conjunction with chlorine or bromine chemicals
and may reduce the amount of those chemicals required.
CAUTION: This product should not be mixed
directly with any other Spa Chlorinator or Shock product. Add only to water,
never to any feeder, floater or skimmer containing bromine or chlorine
compounds (a reaction could occur).
Product Details
1 Quart bottle
Non-foaming
Kills and prevents algae
Note: Be sure to read and follow all product
label directions and warnings carefully.
Spa Calcium and Scale inhibits scale and staining in
spas or hot tubs. It also prevents calcium build-up on spa surfaces. Regular
application of this product as part of the total spa maintenance program
will keep spa surfaces and plumbing in excellent condition.
Directions Doses should be added once a week.
Add 2 ounces of this product per 500 gallons of water.
Add directly to the spa water while pump is circulating.
No waiting is required. You may enjoy your spa while this product is
working.
CAUTION: This product
should not be mixed directly with any Spa Chlorinator or Shock product. Add
only to water, never to any feeder, floater, or skimmer containing bromine
or chlorine compounds (a reaction could occur).
Be sure to read and follow all product label directions and warnings
carefully.
Hardness Increaser
boosts the calcium hardness of spa water. This prevents excessive etching
and corrosion of hot tub equipment caused by water which contains very low
levels of dissolved calcium. Also reduces foaming caused by soft water.
An important
factor in balancing spa water is the maintenance of a proper calcium
hardness range of 200-300 ppm. Some water is too low in calcium
hardness for spas unless treated. Low calcium hardness levels lead to
corrosive water conditions that can cause etching of plaster. A rough
plaster surface is difficult to clean and allows a place for algae roots to
lodge. Calcium hardness levels can be increased by adding Liquid
Hardness Increaser directly to the water. The addition of 2 ounces of
solution will increase the hardness of a 500 gallon spa approximately 14
ppm.
Removes and prevents oil
build up in filter and at tile line
This product is environmentally friendly tile and water
cleaner. Natures own enzymes help eradicate grease, oil and scum build
up caused by body oils, suntan oils, and other contaminants. When used
to treat an existing water or filter problem, results will be visible in 2
to 3 days. This product will not affect water balance. No
waiting is required.
Circulates in the spa water digesting
oily wastes from the water; spa walls, floors and other surfaces, and
plumbing. These digested oils are converted to carbon dioxide (a
harmless gas that leaves the water) and water.
COMPATIBLE WITH OTHER CHEMICALS USED IN
SPA WATER TREATMENT.
Be sure to read and follow all product label directions and warnings
carefully.
Fast-dissolving granules kill bacteria, destroy organic contaminants and control
algae. Also contains cyanuric acid to stabilize chlorine level. These
fast-dissolving granules kill bacteria, destroy organic contaminants and control
algae; HTH® Spa Chlorinating Granules also contain cyanuric acid,
which stabilizes your chlorine level. Treat daily or as needed to maintain a
chlorine level of 4-5 ppm.
Directions
For start up: Add 5 teaspoons of Spa Chlorinating
Granules per 500 gallons directly to spa water.
For daily treatment: Add 2½ teaspoons per 500
gallons of spa water.
To shock spa: Add 1 oz. of Spa Shock for each 500
gallons of water directly to spa water.
Product Details
Sodium Dichloro-s-Triazine Trione Dihydrate (dichlor) 99%
Available chlorine 55%
Note: Be sure to read and follow all product label directions and warnings
carefully.
CAUTION: This product should not be mixed directly with any other HTH®
Spa Chlorinator or Shock product. Add only to water, never to any feeder,
floater or skimmer containing other bromine or chlorine compounds (a reaction
could occur).
Can be used with a
Spa floater with adjustable setting.
All products
you will receive may not be shown in picture
Manufacturers Brand may vary....
Chlorine Spa Kit - Complete
when changing, starting up or replacing water in tub.
Everything you need if you use chlorine as your spa sanitizer
Kit Includes:
(Picture does not show all products
included!)
1. Defoamer - 16 Oz.
2. Test Strips (Chlorine - 50 Strips!)
3. Non-Chlorine Shock - 2 lb!
4. Stabilized Granular Chlorine - 2 - lbs.
5. Water Clarifier - 16 oz.
6. pH Up 16 oz.
7. pH Down 16 oz.
8. pH Stable – 32 oz.
9. Algaecide – 32 oz.
10. Stain & Scale – 16 oz.
11. Filter Cleaner 32 Oz.
12. 2 - Spa fragrance scent samplers (our choice of scents)
NOTE: (whenever you use defoamer, you should use a clarifier!)
(Flocculent type
clarifiers
shouldn't be used with Nature2 as they will typically affect ions in solution.
Our water brightener is a polymer based clarifier that is environmentally safe,
all natural and biodegradable. It clears cloudy water and sequesters oils, dirt
and scum.)
Leisure Time
DELUXE CHLORINE Spa Chemical Care
Kit
When changing, starting up or replacing water in tub
Everything you need if you use chlorine as your spa sanitizer
For
START-UP AND MAINTENANCE
Leisure Time has been the
premier name in spa water care. During that
time, spas have become more luxurious and
consumers more sophisticated. To continue
earning that position as the leader in spa water
care, Leisure Time has redefined the product
line, the program and the packaging that
elegantly wraps up years of innovation. The
upscale new look reflects the superior quality
of Leisure Time products. Plus, Leisure Time has
developed Simple Spa Care®, an easy-to-follow
program that allows spa owners to spend more
time in their spas and less time maintaining
them.
EVERYTHING you NEED and
MORE!!!!
LeisureTime Deluxe Spa Care Chlorine Kit is
packaged in a convenient, reusable plastic
container, this large assortment of chemicals
comes in BIGGER sizes than the Complete Spa Care
Kit and can be easily organized and stored. The
kit contains the Simple Spa Care® video and Spa
Care Guide to answer many of the spa owner's
questions and outline the NEW Simple Spa Care
Program.
This new kit offers the convenience of Leisure
Time's popular kits in a new reusable pail!
Includes a supply of all start-up kit formulas,
plus Leisure Time's Kover Kare & Konditioner,
Spa Cartridge Filter Clean, Scum Gon, Spa Water
Care instructional video, and Rubber Duck
accessory.
The
Chlorine Kit contains
:
(full size bottles)
Sanitizing system of your
choice: Brominating Tablet
System Brominating Tablets (3.5 oz.
with float) & Sodium Bromide (2 oz.) Chlorine Sanitizing
System Spa 56 Chlorinating Granules
(1 lb.)
Spa Up (1 lb.) & Spa Down (1
lb.) pH and alkalinity balancers
A selection of clarifiers &
shock including: Renew (1
lb.) non-chlorine shock treatment Spa Bright & Clear
(16 oz.) and
Spa Scum Gon
(16 oz.) water clarifiers Spa Foam Down
(16 oz.) foam reducer
Stain & scale prevention
formulas including: Spa Defender
(16 oz.) to prevent scale deposits Spa Metal Gon
(16 oz.) to prevent metal staining
Spa Water Test Strips
(25 strips) for testing pH,
total alkalinity, and bromine or chlorine
levels
Kover Kare & Konditioner
(16 oz.) to clean & protect spa covers
Mini Slow-Dissolving Brominating Tablets for Pool & Spa
For use with a
Spa floater with adjustable setting
For Low-odor Sanitation....
Directions
Prior to use, increase sodium bromide level.
Add 1/2 ounce per 100 gallons.
Use a Spa floater with Adjustable setting.
Fill floater and adjust setting per directions on floater.
Maintain a level of bromine at 2 to 4 ppm.
Shock-treat with Spa Shock weekly.
Product Details
Contains both bromine and chlorine
Bromochloro Dimethyl Hydantoin (BCDMH)
Note: Be sure to read and follow all product label directions and warnings
carefully
CAUTION: This product should not be mixed directly with any other Spa
Chlorinator or Shock product. Add only to water, never to any feeder floater or
skimmer containing other bromine or chlorine compounds a reaction could occur.
The HTH® Spa Brominating Capsule
contains both bromine and chlorine. It floats in your spa continually
cleaning the water for your comfort and protection.
Directions
Settings to adjust bromine output into spa go from 0
to 5
To adjust bromine levels, adjust setting per directions on floater
Maintain a level of bromine at 2 to 4 ppm.
Shock-treat with HTH® Spa Shock weekly
Product Details
Treats up to 350 gallons
Bromochloro Dimethyl Hydantoin (BCDMH)
Carefully read and follow all directions when adding spa chlorinators and
shocks.
These products can be used in the same spa water but should not be mixed
together in any floater feeder or skimmer.
CAUTION: This product should not be mixed directly with any other HTH®
Spa Chlorinator or Shock product. Add only to water, never to any feeder floater
or skimmer containing other bromine or chlorine compounds (a reaction could
occur).
Powerful Disinfectant. HTH®
Brom Start uses sodium bromide to establish a bromide reserve in spa and hot tub
water.
This is necessary to disinfect the water.
Directions
Before using Brominating Tablets for the first time,
and whenever the spa or hot tub is drained and refilled, add one-half ounce of
Sodium Bromide per 100 gallons of spa water to establish a 30 ppm bromide
reserve.
When used with Brominating Tablets, Sodium Bromide will ensure that the
disinfection of spa or hot tub water is completely bromine-based and will
eliminate chlorine odors.
Product Details
2 ounce pouches
Note: Be sure to read and follow all product label directions and warnings
carefully.
CAUTION: Add only to water, never to any feeder,
floater or skimmer containing any other bromine or chlorine compounds (a
reaction could occur).
This specially formulated mix of bromide
salts becomes a powerful bromine sanitizer when combined with
Non-Chlorine
Shock. Not only is this two-part system completely chlorine-free, but there are
no unpleasant side effects. Use Reserve as part of the Reserve & Non-Chlorine
Sanitizing System.
Features: A bromide solution for use with
Non-Chlorine Shock as part of a system for
disinfection of water in spas
100% bromine sanitizer-CHLORINE FREE!
Easy-to-use liquid
Applications: Weekly:
1. Treat the spa with Metal Gon according to its label directions.
2. Add Reserve (4 oz./250 gallons of spa water) directly into the spa while
circulating the water to assure rapid and thorough distribution.
3. Add Non-Chlorine Shock to activate the bromide bank for a bromine
residual.
Genesis Tru-Blu!
contains no chlorine or other sanitizers and is
intended to be used to provide an additional
source of bromide ions in a bromine based
sanitizing system. It is necessary to use
an EPS registered bromine-based sanitizer for
disinfection process. Tru-Blu! is
recommended for use with Genesis Brominating
Systems. When used as directed, Tru-Blu!
will ensure a completely bromine-based
sanitizing system and eliminate spa or hot tub
odors.
DIRECTIONS FOR USE:
Tru-Blu! should be added to spa
or hot tub water at a rate of 1 Bottle for every
100 US Gallons. Add Tru-Blu! when spa or
hot tub is first filled, or whenever the water
is drained and refilled, to produce a bromine
ion reserve prior to using Genesis Brominating
Systems.