Floating Spa Brominator/Chlorinator
helps regulate the bromine or chlorine sanitizer level of your spa water.
Easy to use 'Twist and Dispense' design holds up to a two weeks supply of
bromine or Chlorine in container.
Only $6.99 !!!!
#BROM_FLOAT-
A
#08725 - B
Adjustable Frog Chemical Dispenser
MEDIUM
Unique Animal Design or Classic Blue/White
Holds 1" Chlorine or Bromine Tablets or Sticks
Adjustable Control Ring
Floating Spa Brominator/Chlorinator
helps regulate the bromine or chlorine sanitizer level of your spa water.
Easy to use 'Twist and Dispense' design holds up to a two weeks supply of
bromine or Chlorine in container.
Only $9.99 !!!!
#05147 Frog
#01800 Dolphin
#08715 Classic Blue/White
Large Adjustable Chemical Dispenser
LARGE
Unique Animal Designs or Classic Blue/White
Holds 1" or 3" Chlorine or Bromine Tablets
Heavy Duty Design
Has Locking Cap & Adjustable Control Ring
Floating Spa Brominator/Chlorinator
helps regulate the bromine or chlorine sanitizer level of your spa water.
Easy to use 'Twist and Dispense' design holds up to a two weeks supply of
bromine or Chlorine in container.
Choose from Blue/White
Classic, Turbo Turtle, Derby Dolphin or Sunny Duck
DIRT DEVIL SMALL SPA (OR SPLASHER
POOL) FLOATING CHEMICAL DISPENSER
SMALL
Holds 1" Chlorine or Bromine Tablets or Sticks
Adjustable Control Ring
Floating Spa/Pool Brominator/Chlorinator
helps regulate the bromine or chlorine sanitizer level of your spa water.
Easy to use 'Twist and Dispense' design holds up to a two weeks supply of
bromine or Chlorine in container.
Only $4.99 !!!!
#46058715
ON SPECIAL!
LOWEST PRICE EVER!!!
DIRT DEVIL LARGE FLOATING CHEMICAL
DISPENSER
LARGE
Holds 1" OR 3" Chlorine or Bromine Tablets or Sticks
Adjustable Control Ring
Floating Pool/Spa Brominator/Chlorinator
helps regulate the bromine or chlorine sanitizer level of your spa water.
Easy to use 'Twist and Dispense' design holds up to a two weeks supply of
bromine or Chlorine in container.
(amt. of chemicals you get, depend
on size kit you buy)
(product manufacturers may differ
from pictures)
Sorry, Rubber Ducky in picture
not included in kit!
Pool
OPENING Kits
Treats Pools up to 20,000 gallons &
20-30,000 gallon Pools
All the chemicals and more you need
in our opening kits for your pool!
When you open your pool for the
first time in the spring/summer after a long winter, your pool water is
filled with chloramines and contaminants. These opening kits will
oxidize and purify your pool water.
up to 20,000 Gallons Kit Includes:
$20.99
Shock Treatment Chlorine (REFRESH) -
((2) 16-oz (1-lb) Granular - bags)
• Algaecide ((2)Yellow Stuff)
• Metal/Stain Control/Remover ((2) 32 oz liquid bottle)
• Clarifier (PoolLife or other Brand) – ((1) 32-oz Liquid)
• Test Strips (1 btl) (50 Strips)
• Filter Cleaner (1) (32 oz liquid bottle)
• Tile & Vinyl Cleaner (1)(32 oz liquid bottle)
• Opening Booklet / Water Treatment Info (1)
• Backwash Hose (1)
• Footmitt Scrub (cleans pool & CONRETE!) (1)
20,000 - 30,000 Gallons Kit Includes:
$24.99
• Shock Treatment Chlorine (REFRESH)
- ((3) 16-oz (1-lb) Granular - bags)
• Algaecide ((2)Yellow Stuff)
• Metal/Stain Control/Remover ((2) 32 oz liquid bottle)
• Clarifier (PoolLife or other Brand) – ((1) 32-oz Liquid)
• Test Strips (1 btl) (50 Strips)
• Filter Cleaner (1) (32 oz liquid bottle)
• Tile & Vinyl Cleaner (1)(32 oz liquid bottle)
• Opening Booklet / Water Treatment Info (1)
• Backwash Hose (1)
• Footmitt Scrub (cleans pool & CONRETE!) (1)
Ensures silky, sparkling water, prevents scum and waterline ring, eliminates
chemical odors, keeps filters clear, extends filter life and reduces
shocking with just a few capfuls each week.
Pool Perfect is a natural enzyme product that biodegrades organic
contaminants to reduce maintenance, prevent scum lines, eliminate chemical
odors and produce clear, perfect water.
Dosage: 5 oz. per 10,000 gallons.
Why use Pool Perfect Enzymes?
Your pool water is constantly absorbing organic material from its
environment.
What kind of organic material, you ask?
Organic contaminants come in a wide variety, including:
• suntan & sunscreen lotions
• body oils, sweat, (urine…blech!)
• cosmetics & hair care products
• airborne vehicle fuels & exhaust
• decaying vegetation
and the list goes on…
These organic contaminants build-up in your pool water. Typically organics
have been treated with chlorine or other sanitizing chemicals…unfortunately
sanitizers do not do an efficient job. Sanitizers like chlorine oxidize
organics and turn them into a sludge like waste that turns into a scum line
on your pool walls and create the strong chemical type odors common to many
pools.
This is where Pool Perfect Enzymes shine. Natural enzymes, like those found
in your own body, are designed by nature to break down or biodegrade
organics.
The enzymes in Pool Perfect literally break down organic waste to basic
elements like carbon dioxide and water, that are then easily absorbed by the
pool environment.
The result?
• eliminates skin & eye irritation
• eliminates strong chemical odors
• no scum line
• clean pool filters less
• reduced pool maintenance
• makes water feel soft & silky
• enhances any sanitizer program
Clear, Perfect Water…
Unconditionally Guaranteed!
Clears cloudy water and allows swimming shortly after
application!!
Open a sparkling pool next Spring!
Our complete Winter Closing Kit includes everything you need to close your
pool this fall. Prepare your pool for the winter months for an easy Spring
Opening. Kit includes top quality Granular Chlorinating Shock,
Winterizing non-foaming Algaecide, Winterizing Metal Control Conditioner, Instructions
and Winter/Solar Cover Cleaner (free).
Product Description
Quart. Safe for all pools. Effective treatment against green and yellow
algae. Ideal for winterizing.
30% & 60% active
chlorine.
Non-foaming. Bottle.
Made in United States by Arch Chemical.
Product Features
Quart
Safe for all pools & spas
Effective treatment against green and yellow algae
Ideal for winterizing & opening pool & spas Product manufacturer may vary from pictures.
Product # 61102
Hth Super Algae
Eliminate 30 - $6.99
Product #
61103 Hth or Club Pro Super Algae
Eliminate 60 - $17.50
High metal content
in pool water can cause staining and discolored water. HTH® Metal Control is
a mild acid used to remove iron, copper, manganese and other metals from the
water. It also removes metal stains and reduces the amount of calcium
carbonate (scale) deposited on pool surfaces. So in addition to removing
metal stains and metal build-up, it provides a strong defense, preventing
colored water and stains from forming.
Application
Add directly to your pool water, concentrating (if applicable) on
affected areas.
Dosage /
Frequency
Add 1 quart per 10,000 gallons of water for every ppm of metal.
If metal concentration exceeds 2 ppm, add Clarifier or Super
Concentrated Clarifier in addition to the metal control.
Safety
Read and follow all label directions and warnings carefully.
Useful
Tips
Add in
the evening
Use in addition to Clarifier or Super Concentrated Clarifier if
metal concentration exceeds 2 ppm
HTH Filter Cleaner is a product designed to remove oil,
grease, dirt, and soap from all makes of cartridge filters. It is composed
of an acidic solution which helps to break down organic and inorganic mater
that accumulates in cartridge filters. HTH Filter Cleaner Works well with
any type of cartridge filter.
Application
Soaking
For cartridges and removable D.E. (diatomaceous earth) elements:
Remove elements and rinse with clear water.
Prepare a solution by adding 1 quart of HTH Filter Cleaner to 2 gallons of
warm water in a large plastic bucket or garbage can. Prepare enough solution
to cover filter. For heavily soiled cartridges add 2 quarts of HTH Filter
Cleaner to the 2 gallons of water.
Place the filter cartridge or D.E. element in the cleaning solution and
allow soaking overnight (12 hours). Lightly soiled elements can be soaked
for as little as 4 hours.
Rinse filter thoroughly with clean water and replace.
Filter elements should be allowed to dry before installing in the filter
unit if they are going to be stored.
Backwashing
To improve backwash and to clean sand and D.E. filters:
Turn off pump and set valves to backwash position.
During backwash, slowly add HTH Filter Cleaner to skimmer.
*Use 1 quart for sand filters up to 2 feet in
diameter or D.E. filters up to 1 foot in
diameter.
*Use 2 quarts for larger filters.
Backwash until the backwash water is clean and no foam is visible.
Return filter to normal operation.
To combine backwashing and soaking period:
Backwash for up to 1 minute and leave valves in backwash position.
Fill the filter tank with a solution of HTH Filter Cleaner in water: Either
prepare the solution as above (see “Soaking, #2) and use the pump to feed
the solution through the pump strainer (requires 7 to 20 gallons of water)
or add HTH Filter Cleaner directly to the filter or directly through the
skimmer.
* Use 2 quarts for sand filters up to 2 feet in
diameter or D.E. filters to 1 foot in diameter.
* Use 4 quarts for larger filters. Allow the
filter to soak several hours (12 hours) or
overnight.
Next day, backwash until effluent water is clear (no foam), then return to
normal operation.
Dosage / Frequency
Use as needed. See detailed instructions above (“Application”).
Safety
Read and follow all label directions and warnings carefully.
Useful Tips
1 pint to 4 gallons of water will clean up to 55 square feet of filter area.
Add cartridges to solution and soak for 3-6 hours, rinse with high pressure
hose nozzle.
Product Details
1 quart
Liquid product
Remove oil, grease, dirt, and soap from all makes of cartridge filters.
Contains: Citric Acid, 2-Butoxy Ethanol, Hydroxyethanedisphonic Acid Poly
(oxy-1,2-ethanediyl), alpha-(nonylphenyl-omega-hydroxy)
Spray 'N' Rinse Filter
Cartridge Cleaner for Pools and Spas and D.E. filter elements is a product designed to remove
Minerals and other debris from filter element. It removes Oils,
Minerals and Scales. Non-Soak formula and extends the
life of your filter. Spray 'N'
Rinse Filter Cartridge Cleaner Works well with any type of cartridge filter.
DIRECTIONS FOR USE:
Remove D.E. or cartridge filter element from filter
casing. Rinse off loose material on element. thoroughly saturate
filter element with water. Spray cleaner over total surface area of
filter element for maximum effect. Let set 3-6 minutes. Rinse
element THOROUGHLY with hose (foaming in pool may occur if filter element
is not completely rinsed). Especially heavy soiled filter element may
need second application. Removes scale, minerals, dead algae, body oils
and other debris.
A Stabilizer
(conditioner) is a chemical that prevents the ultra-violet
rays of the sun from prematurely dissipating the chlorine
level. Pool Stabilizer reduces sanitizer consumption
by up to 50% and should be added at pool opening, or
refilling. It is important to test
(click here for test strips) your stabilizer
level because stabilizer stays in your water indefinitely.
If stabilizer was added in the past, you generally just add
it based on the gallons of water added this season. Too much
stabilizer can cause cloudy water. One pound of
stabilizer treats approx. 5000 gallons of water...
The sun’s ultraviolet (UV)
rays will make the chlorine in an outdoor pool dissipate quickly. In
fact, an ideal level of chlorine in an “unstabilized” pool or spa can
be lost in less than two hours on a bright sunny day, due to the UV
rays of the sun. Cyanuric acid acts as a “stabilizer” that helps
chlorine hold up better when exposed to the UV rays. You can think of
cyanuric acid as blocking the effect that the sunlight has on breaking
down the chlorine—kind of like a sunscreen for your pool.
Floc is short for flocculant.
Flocculants are a chemical that make small particles join with each other to
make bigger particles. This is handy for swimming pool owners because their
pools tend to get little bits of dead algae and skin in them that make the
water go cloudy and these can be too small for the filter to strain out.
There are two main types of
flocculant but they are both the same chemical - Aluminium Sulphate also
know as just plain 'alum'. In one form it is in flakey granules in the other
it is a solid tablet (kibbled alum). The latter is used to 'polish' up a
pool that is getting a bit cloudy the former as a last resort on a truly
mucky pool (or as a first resort when opening up after winter).
Kibbled alum tablets are added
to the water via the skimmer basket. Don't put them in the circulation pump
strainer basket because the water in there goes to fast for them. Keep your
filter going full time. The alum dissolves and forms a coating on top of the
filter sand. Then, as the little particles come by it grabs them and keeps
them. But in doing so it blocks up the top of the filter and can increase
the filter pressure. If the pressure gets too high the coating breaks up and
gets washed through the filter and back into the pool taking all the little
bits with it and you are back to square one. So, always thoroughly backwash
the filter before putting the alum in and keep an eye on the pressure while
it is in there. If it gets too high backwash add more tablets. In any case
backwash after 48hrs of filtration and if the pool isn't clear enough do it
again. It may take three or four goes before you get it perfectly clear.
There are other chemicals you
can use to clarify your pool, the term floc tends to apply to Alum.
Pool Clarifiers, as
they are usually called, do the same as Alum in that they gather small
particles together but they work by putting an electrical charge on the
particles. The general name for them is Cationic Liquid Clarifiers and there
are many types. They work very well and quite quickly also.
Cloudy pool water is often caused by small organic particles (dirt, oils,
lotions, dead algae) and minerals (iron, copper, plaster, calcium) that are
too small to be trapped between the grains of sand filter. When used
in accordance with directions, Sand*Rite creates a fine mesh on the sand
surface that traps small organic particles and minerals. Sand*Rite is
formulated with active ingredients to remove the trace minerals of iron and
copper that may be in solution (minerals in solution are normally
unfilterable). Using Sand*Rite will insure the thorough filtration
necessary to return clarity to your pool water.
Bug Away helps Mother Nature rid
your swimming pool surface of nuisance diving and floating insects.
Bug Away makes it impossible for insects to say on top the surface. By
acting as a wetting agent:, the insects soon become too wet and sink to the
bottom where they can be easily removed by vacuuming.
No waiting period is required after Bug Away is
applied. Bug Away may be used whenever insects need to be removed from
the pool water surfaces.
Directions For Use:
Apply 10 ounces of Bug Away per 10,000 gallons of pool water. Pour
directly into the pool with the pump running. A second application may
be required if there are large amounts of insects. Bug Away may cause
minor foaming which will later dissipate.
1 Quart container
Safety
Be sure to read and follow all label warnings and directions carefully.
Flip-Out !™ Biguanide Remover 2-Lb
Jar For swimming pools
CONCENTRATED COMPOUND THAT REMOVES
BIGUANIDES EASY!
Use to convert
pool water to Chlorine or E-Z Pool™ .
REMOVES AND
CONVERTS BAQUACIL® AND SOFTSWIM® POOLS TO CHLORINE OR E-Z POOL WITHOUT
LOSING USE OF THE POOL!
Safe for all
pool types. Concentrated formula removes biguanides and easily converts your
pool back to chlorine or any other sanitizing system. Simply add 2 lbs. per
10,000 gallons of water, wait a few days and test the biguanide level.
Biguanide level must fall below 15 ppm to ensure a smooth conversion.
Quickly Oxidizes Biguanide Clarifies Pool water Swim While Converting!!
Flip-out! is a uniquely blended compound that breaks down biguanide and
removes it from pool water, usually in 3 to 4 days. As an added bonus, the
water stays clear and swimable while the conversion is taking place.
Flip-out! is not only fast and efficient, it is the most economical way to
"flip" a biguanide pool. Use flip-out! to convert biguanide pools to E-Z
Pool or to chlorine.
CONVERTING FROM
BIGUANIDES: Filter continuously while converting. Test for metals and
sequester if needed, then...
1. Add 2 lbs. of Flip-out! per
10,000 gallons of water. Add one 3" chlorine tablet per 10,000 gallons to
the skimmer. Wait 3 – 4 days. 2. Test water sample. If biguanides level is
15 ppm or lower, proceed to Step 3. If biguanides level is above 15 ppm,
repeat Step 1.
3. Balance water: TA = 80 –
120 ppm; pH = 7.6; Calcium Hardness = 350 – 400 ppm (which is a little
higher than normal, but well within acceptable ranges...a very important
step for E-Z Pool).
4. Clean sand filter
thoroughly or change the sand; change, clean D.E. filter very well and
replace media with fresh D.E. powder; Clean Cartridge Filters chemically
and/or replace with a new cartridge.
5. Add weekly dose of E-Z Pool
and use "Weekly Dosage" 3" chlorine tablet to the skimmer basket if
converting to E-Z Pool. If converting to a Chlorine based sanitizer, keep
one 3" chlorine tablet per 10,000 gallons in skimmer basket or floater for
14 days (21 days if you had a previous Biguanide based water mold problem).
6. Run on E-Z Pool for 7 – 10
days. Or if Chlorine based only, use only Tri-chlor tablets this duration.
7. Clean filter media
thoroughly, again: Sand – chemically clean and rinse. DE – Flush, rinse and
re-charge (3/4 charge). Cartridge – Clean and rinse element thoroughly if in
good condition.
8. Follow E-Z Pool "Routine
Weekly Maintenance" instructions or begin Chlorine Pool Care routine.
9. Monitor filter weekly: Sand
– Backwash weekly or as needed. DE – Flush and recharge when pressure rises
5 – 10 psi over clean start-up pressure. Cartridge – Check and rinse clean
weekly or when pressure rises 5 – 10 psi over clean start-up pressure.
A "chlorine only" treatment
regimen may be adopted in lieu of E-Z Pool after Flip-out conversion if
desired. This is the Simplest, Fastest and Most Economical way to convert
from biguanide systems!
Also cleans patio furniture and many
other household surfaces!
Great for Tile, Vinyl, Fiberglass &
Concrete!
Helps clean large surfaces quickly,
yet gently.
Excellent on a variety of surface
types-especially suited for pools and spa, but also cleans patio furniture &
many other household surfaces. Scrubs off Algae deposits & scale
stains.
HTH Spa Scrub. Tile Cleaner & reusable applicator.
Quickly cleans pool and spa surfaces. Compatible with most cleaning
products. Wet, thoroughly, wipe, rinse and dry. Reusable. Use on Spas, hot
tubs, pools, tile, vinyl, accessories, ceramics, fiberglass, acrylic,
chrome, stainless steel & more!
The Spa Scrub pad is designed for fast, safe and easy cleaning. Since it
contains all natural ingredients, it's great for use in the pool, spa,
kitchen, bathroom and more. When used with water, Spa Scrub will not affect
pool or spa chemistry. Use Spa Scrub as a cleaner or an applicator. Just
remember....the wetter - the better!
Use when opening, closing or changing water in
your spa!
Pre-Moistened - Disposable Mitts - Pack of 5!
Removes oils, dirt, scum and waterline build-up
Safe for spa surfaces and gentle on
hands! SpaClear Spa Mitt is perfect for quick and easy clean-up on
all POOL, SPA, Patio and BACKYARD SURFACES. Use along the waterline
and other soiled surfaces to remove oils, dirt and scum buildup.
CONCENTRATED CLEANER FOR TILE, VINYL, FIBERGLASS AND ACRYLIC
A fast acting spray and wipe-off concentrated blend of biodegradable
detergents and suspension agents. These agents penetrate beneath the
grease, grime and soils to lift them off the surface being cleaned.
Gel Concentrate Tile & Vinyl Cleaner - 4 oz. with Hand Scrubber
High Power
Gel Concentrate
Won't Drip
Comes with
easy-to-use Hand Scrubber!
For Swimming Pools
or Spas
THE EASY
WAY TO CLEAN!
This
SUPER concentrated but gentle formula is designed to work on tile& vinyl
surfaces. It will not damage grout or metal fixtures. This
products is a breeze to use for either the service professional or the home
owner.
DIRECTIONS:
The light
blue gel in this tube will wisk away dirt & grime from around any tile line.
After removing cap, squeeze tube so that gel is placed directly on scrub
pad. A pool (or spa) brush or rag may be substituted. Because
this product is concentrated, it may be used sparingly. Douse scrub
pad with pool or spa water as you go around the pool or spa wall creating a
cleansing foam. The second brushing around the pool or spa will clean
off remaining foam.
Bioclean is a unique blend of natural
enzymes that eliminate organic odors and stains on all fabrics and soft
surfaces. From grape jelly, coffee, pet stains and odors, soft drinks on
carpets and upholstery to patio furniture and spa covers.
BioClean is an amazing soft surface cleaner,
deodorizer and stain remover…all in one!
Bioclean is a unique blend of natural enzymes that
eliminate organic odors and stains on all fabrics and
soft surfaces. From grape jelly, coffee, pet stains and
odors, soft drinks on carpets and upholstery to patio
furniture and spa covers.
Use on: • Grass stains on clothing
• Spa covers
• Microwave ovens & stovetops
• Pet accidents & odors
• Sports equipment
The
uses are endless…
It
can be used in and around the pool & spa water with no
negative effects on pool or spa chemistry. It can also
be used in and around the home without worry…Bioclean is
environmentally better, non-toxic and biodegradable.
Use
Bioclean and enjoy freedom from harsh chemical cleaners!
HTH® Cover Cleaner is an easy-to-use, all-purpose
cleaner for pool covers. It cleans, deodorizes, protects and prolongs the
useful life of pool covers. It removes dirt, grease, oils, grime, and odors
from pool covers. It will protect a cover from deteriorating and sticking
together during storage. This product may also be used to clean plastic or
canvas outdoor furniture, boat covers, umbrellas and other vinyl and canvas
accessories.
Directions:
Opening Pool
Remove debris and water from pool cover while cover is still on the pool.
Remove cover and spread out on a smooth, flat surface.
Dilute 32 ounces of this product in 5 gallons of water and apply to the
entire cover surface.
Brush cover clean, then rinse.
Clean other side of cover.
Lightly sprinkle this diluted product over cover as it is being folded for
storage.
Closing Pool:
Remove cover from storage and spread out on smooth surface.
Dilute 24 ounces of this product in 5 gallons of water.
Sprinkle over cover surface, then rinse.
Treat other side of cover also, then secure cover.
Safety:
Be sure to read and follow all label warnings and directions carefully.
HTH® Tile & Vinyl Cleaner is an easy-to-use,
all-purpose cleaner for use above the waterline. It cleans dirt, scum, oils
and other debris along tile and vinyl surfaces. When used as directed, HTH®
Tile & Vinyl Cleaner quickly removes scum line buildup around pool.
Application:
Test product on an inconspicuous piece of vinyl before using.
Apply directly to affected areas with a brush or sponge.
Let stand for two minutes before scrubbing.
Read label directions carefully before use
Dosage / Frequency:
Use as needed to clean on and above your pool’s waterline.
Safety
Read and follow all label directions and warnings carefully.
Useful Tips:
The more frequently you clean along the scum line of your pool, the easier
it will be to remove build up.
Product Details
Contains Dipropylene Glycol Monomethyl Ether
Thick, viscous blue liquid
This product represents the latest generation in water
clarification. Pool owner will find filters last longer and operate
better. It may be applied while pool is in use.
1/2 Gallon (64 oz) container
Safety
Be sure to read and follow all label warnings and directions carefully.
Gold-N-Clear is a revolutionary
water treatment formulation that turns pool water from cloudy to clear like
magic. A unique color transformation from golden to blue occurs when
Gold-N-Clear reacts with micro-particles in the water indicating that the
clarifying action has begun. Gold-N-Clear clears and brightens cloudy water
by coagulating suspended micro-sized particles of dirt and other organic
contaminants to masses large enough to be removed automatically by the
filter. Regular use of Gold-N-Clear will help your filter do its job more
effectively. Gold-N-Clear is a highly concentrated formula, contains no
dyes, is non-toxic and 100% biodegradable.
8 oz bottle
Features:
Super concentrated formula
Removes micro-particles for sparkling water
Fast results right before your eyes
Recommended dosage:
1 oz. per 6,000
gallons. For very cloudy water 1 oz. per 3,000 gallons.
Safety
Be sure to read and follow all label warnings and directions carefully.
For
swimming pools; specially formulated for pools using Baquacil®
or Soft Swim®, referred to as Polymeric Biguanide.
Eliminates bathtub ring, removes oils
and lotions. Reduces filter clogging, extends filter cycle and less
frequent backwashing. No more oily scum on surface and improved water
clarity, Removes tainted oil odors.
1 Quart container
Safety
Be sure to read and follow all label warnings and directions carefully.
Natural enzyme formulation reduces spa maintenance by
breaking down oils, lotions and organics that can cause odors, scum lines,
and cloudy water. 100% biodegradable and safe for the environment.
Keeps water sparkling clean
Removes and prevents oil build up in filter and at
tile line
Will not effect water balance
No waiting required
Product manufacturer may vary from pictures.
NOTE:
Whenever
you use a defoamer, you should ALWAYS use it in conjunction with a spa clarifier or
scum out!
Fast-dissolving granules kill bacteria, destroy organic contaminants and control
algae. Also contains cyanuric acid to stabilize chlorine level. These
fast-dissolving granules kill bacteria, destroy organic contaminants and control
algae; HTH® Spa Chlorinating Granules also contain cyanuric acid,
which stabilizes your chlorine level. Treat daily or as needed to maintain a
chlorine level of 4-5 ppm.
Note: Be sure to read and follow all product label directions and warnings
carefully.
CAUTION: This product should not be mixed directly with any other Shock product. Add only to water, never to any feeder,
floater or skimmer containing other bromine or chlorine compounds (a reaction
could occur).
Can be used with a
Pool or
Spa floater with adjustable setting.
Dry Chlorinating Granular Chlorine 16
oz (1-lb!) Bags
Designed for the
rapid control of algae and for super-chlorination at time of pool opening and
closings. These quick dissolving granules will destroy most strains of
unsightly algae within 24 hours. Dead algae will come to rest on the pool
floor. Remove by vacuuming frequently.
Mini Slow-Dissolving Brominating Tablets for Pool & Spa
For use with a
Spa floater with adjustable setting
For Low-odor Sanitation....
Directions
Prior to use, increase sodium bromide level.
Add 1/2 ounce per 100 gallons.
Use a Spa floater with Adjustable setting.
Fill floater and adjust setting per directions on floater.
Maintain a level of bromine at 2 to 4 ppm.
Shock-treat with Shock weekly.
CARTRIDGES GOOD FOR 6 MONTHS & VESSELS GOOD FOREVER!
Nature2 — Improved water quality you can see and feel
It Feels Better.
Cuts
chlorine use to just 0.5ppm
Reduces potential for stinging eyes and skin irritation
Reduced potential for unpleasant odors
Once
you swim in a Nature2 pool, you'll never want to swim
in a pool without it!
Stable water, even in hot weather and heavily used pools
Will
not damage your pool equipment
Compatible with other pool maintenance products
It works better.
Patented mineral process destroys bacteria and algae
Saves time & money No electricity, no moving parts.
It's powered by water flow
Reduces work & chemical volume
Nature2
water is brilliantly clear and soft.
No Vessel Needed! Just insert in your existing filter cartridge!
Aboveground Vessel
Inground Vessel
Nature 2 Alternative Sanitizers
Nature2 is the leading
alternative to chlorine among swimming pool and spa owners around
the world.
Nature2 reduces chemical use which means no more stinging
eyes, damaged hair, dry skin or harsh chemical odors. By creating a
pure, clean and odor-free pool environment, Nature2 offers you a
difference you can see and feel.
Nature2 pool and spa purifiers are available for new and
existing inground and above ground pools and are easy to install.
For your spa the Nature2 results in less maintenance and is a
reliable purification system.
Some Information
about Nature 2 The only alternative sanitizer
manufacturer who earned the Good Housekeeping Seal on all products
Water so pure, it's even lower in bacteria than government standards
for drinking water.
Reduces chlorine and chemical use by 80-90%.
Prevents stinging eyes, dry skin and hair damage.
No harsh chemical odors.
Stops bleach damage on bathing suits and towels.
It's safe even in hot weather and heavily used pools
Eliminates chemical damage to pump and filter systems
Safe for swimming and the environment
Effective, saves time and money
Patented process kills bacteria on contact, faster than chlorine
No electricity, no moving parts, it's powered by water flow
Reduces work and chemical volume
Shock less and use your pool right away
Conventionally 'sanitized' pool water is harsh and unpleasant
What is Nature2?
Nature2 is a water sanitization technology for swimming
pools and spas that gives crystal clear and the clearest water
imaginable.
How does Nature2 work?
Nature2 Technology products use minerals to destroy
bacteria and algae. Because Nature2 destroys bacteria and
algae, less harsh chemicals are needed to keep your pool or spa water
balanced.
By using Nature2, you reduce the level of chlorine use to
just 0.5ppm versus the levels you would need without Nature2.
What Nature2 does.
Nature2 is the only sanitizer that guarantees all this.
Destroys bacteria and algae
Reduces potential for stinging eyes, skin irritation and
unpleasant odors
Reduces chlorine use to just 0.5ppm
Lower chlorine levels help keep the pool pH balanced
Will not damage your pool equipment
Easy installation
Nature2
is
installed in over 300,000 pools and spas world wide.
carried by more than 5,000 pool and spas dealers nationwide, and
growing.
used by the largest pool builders.
using breakthrough technology protected by 17 worldwide patents and
20 patents pending.
Works
in pools up to 25,000 gallons. For larger in-ground pools, install 2
units.
1. Before Installing and starting up a new Nature2
Cartridge, clean debris and algae out of the pool and
clean pool filter.
Important: Do not install the new cartridge until the
pool water is chemically balanced.
2. Balance pool water:
All swimming pools, including Nature2 pools,
require properly balanced water.
• pH: 7.4 - 7.8
• Total Hardness: 200 - 400 ppm
• Total Alkalinity: 80 - 150 PPM
Consult your Nature2 dealer for specific
water balance instructions.
3. Install the Nature2 cartridge into the
vessel.
4. Superoxidize ("shock") the pool:
On the first day, superoxidize water with 1 lb. dry or 1
gallon liquid chlorine per 10,000 gallons of water to
burn off contaminants and to activate the cartridge.
Important: Initial superoxidation with chlorine is
required.
5. Activate the Nature2 cartridge:
• Run the pump and filter system 24 hours per day for 4
days or
• Run the pump and filter system 6 hours per day for 14
days or
6. Maintain a 1-2 PPM residual free chlorine level
throughout the 4 day or 14 day activation period.
7. Let the free chlorine level drop to 0.5 PPM when
the Cartridge Activation period is complete.
8. Follow the Low Chlorine Maintenance Recipe (see
below).
9. Enjoy your Nature2 sanitized pool!
Nature2 Low Chlorine Maintenance Recipe
Ingredients:
• Nature2 sanitizer
• Chlorine
• pH & Total Alkalinity adjusting chemicals
• Total Hardness increaser, if needed
• Water Test Kit
• Cyanuric acid
Once the 4-day or 14-day Cartridge Activation Period is
completed, let the chlorine level drop to 0.5 PPM by
reducing the amount of chlorine you add then:
When:
What to do:
Everyday
Run the pump and filter system at least 6
hours daily.
Once a week
Balance the pH and Total Alkalinity.
Twice a week
Check the free chlorine residual, add
chlorine to maintain a 0.5 PPM.
As needed
If the water starts to look hazy,
superoxidize ("shock") using 1lb. of
chlorine granules or 1 gal. liquid chlorine
or 1 lb. non-chlorine oxidizer per 10,000
gallons of water. Add cyanuric acid to
maintain 50 PPM After heavy use or
rainstorms, superoxidization is recommended.
FAQ's:
(For residential swimming pools***)
Q:
How do I know if Nature2 is working?
Nature2
Troubleshooting
Problem
What To Look For
Treatment
Cloudy Water
Poor
filtration
Slow
filter turnover rates
Backwash and clean filter
Run
filter for 24 hours
Increase run time per day
Algae
growth
Hazy
pool water; may have slightly green appearance
Superchlorinate water (with dealer's guidance) and
brush pool walls
Unbalanced water
High
hardness
High
TDS (total dissolved solids)
High
pH
High
total alkalinity
Balance
the pool water
Algae
Green
algae
Pea
green color; attaches to pool walls; sometimes
colors the entire body of water
Check pH and adjust if necessary
Superchlorinate water and brush pool walls
Repeat steps 1 and 2 until algae is gone
Black
algae
Black
spots on pool walls
Brush affected areas
Superchlorinate water
Add
algaecide
Vacuum pool
Repeat steps 1 through 4 until algae is gone
Mustard
algae
Yellow
or brown film on steps or walls
Note:
Regular algaecide treatments are recommended for
outdoor pools that experience persistent algae
problems.
Do not use algae treatments containing either copper
or sodium bromide.
Stains
Blue/green
Copper
or iron from pool equipment corrosion or water
supply
Adjust pH and total alkalinity to ideal ranges
Vigorously brush stained areas
Add
sequestrant
Run
filter
Twelve hours later, superchlorinate the pool
Test
and balance water
Test
pool water for dissolved metals
Red/brown
Iron or
manganese from equipment corrosion or water supply
Black
Manganese in water supply
Metal
tarnishing
High
native mineral content in water; unbalanced water
Clean
with soft cloth and mild detergent
Test water for minerals; use a sequestrant; maintain
water balance
Scale
Crusty
deposits on pool surfaces
High pH
and high total alkalinity
Adjust
pH and total alkalinity to ideal ranges.
High TDS
(total dissolved solids) or high hardness levels
Replace a volume of pool water with water low in
hardness and dissolved solids
Use
sequestrant to prevent scale buildup if high
hardness levels are a continuing problem
Equipment
For Professional G, Premium M and Aboveground "A"
Vessel
The
vessel leaks
A.
O-ring missing or improperly seated
See
owner's manual for details
B.
Faulty plumbing
Repair
source of leak in plumbing
No flow
to purifier
Dirty
filter (one indication: pressure is 8-10 psi higher
than normal)
Clean or
backwash filter so operating pressure is always
within 7 psi of a new filter
A:
The best test is improved water quality. You'll notice a big
difference. Visual clarity and sparkle, at 0.5ppm chlorine levels show
Nature2 is working properly.
Q:
After it's installed, will pool maintenance change?
A:
Yes, you will reduce chemical use and maintenance time. Basket
cleaning, vacuuming and water testing will be the same as before, but
the water balance will be easier, meaning there's simply less to do.
Q:
Do I still need to use chlorine? Why?
A:
Yes, you need to use a small amount of residual oxidizer. With the
Nature2 system*
you can reduce the clorine level to just 0.5ppm. We recommend low
levels of free chlorine (0.5 PPM free chlorine minimum). You won't
feel, smell or be affected by chlorine at this level. *The
Nature2 system consists of the patented Nature2
technology used in conjunction with a chlorine delivery device or
0.5ppm of an EPA registered pool product.
Q:
Is Nature2 compatible?
A:
Nature2 is compatible with other products. Nature2
can be used with every type of chemical treatment program available
except bromine and bromide based chemicals, biguanide products
(Baquacil* or SoftSwim**) and copper-based algaecides.
Q:
Is Nature2 a filter?
A:
No. A filter removes particles and debris, while Nature2
sanitizes pool water by destroying bacteria and algae, which are too
small to be caught by a filter. You still need a filter when using a
Nature2 system.
Q:
Is Nature2 an "ionizer"?
A:
No. Ionizers electrically discharge copper (or metal alloy) ions into
water. Ionizers can deliver ions via an electrical current
(electrodes) or salt dissolution. When do I replace the cartridge?
Each model comes with a reminder to tell you when to replace it.
Q:
When do I replace the cartridge?
A:
Each model comes with a reminder to tell you when to replace it.
Q:
What affects cartridge life?
A:
Nothing — including filter run time, heavy use, hot weather, and water
temperature.
Q:
How do I dispose of used cartridges?
A:
The minerals inside Nature2 are harmless, so it is safe for
disposal with other household trash.
Q:
Can Nature2 stain my pool?
A:
No. Nature2 minerals remain well below levels that might
cause staining. In fact, Nature2 offers a "no-stain"
warranty.
Q:
How often do I need to super-oxidize (shock)?
A:
Because of the efficiency of Nature2, super-oxidation is
needed less often. You only need to super-oxidize if the pool becomes
dull or cloudy. The start-up of each new cartridge requires an initial
shock with chlorine. Follow
chlorine manufacturer's label/instruction to super-oxidize.
Aboveground Pools
Reduce chlorine use to just 0.5ppm Now,
Nature2 is available for your pool. That means you can
experience a revolutionary new approach to sanitizing your pool that
gives you the clearest water imaginable. The patented Nature2
sanitizer uses minerals to destroy bacteria and algae. Simply
install the Nature2 Express™ sanitizer at you pool’s
return line, activate the cartridge and let it do the rest for six
months. Then, just sit back and start experiencing a more refreshing
pool.
Using a Nature2 sanitizer means you can significantly
reduce the use of harsh chemicals like chlorine in your pool. And
continuous use of Nature2 in your pool means less
suspended matter and a more consistent pH balance. Just think-
Nature2 reduces the potential for stinging eyes, skin
irritation and unpleasant odors.
Maintaining
a pool with Nature2 is much simpler than using
traditional chemical treatments. The Nature2 sanitizer
works automatically and requires no electricity. Pool owners who
have switched from chemical programs happily report that they are
now spending considerably less time maintaining their pools with
Nature2. This means more time for you to enjoy your pool
and its fresh, clean water.
How does Nature2 Express work?
Water flows through the Nature2 Express Pool sanitizer
which contains a layer of minerals which destroys bacteria and
algae. The sanitizer contains no moving parts and is unaffected by
heavy use, hot weather and water temperature. It provides the
ultimate in water sanitation for your pool for six months.
(From left to right) Professional G Vessel
Professional G Sanitizer Cartridge
Capacity:
up to
45,000 gals.
Dimensions:
20"x11.5"x11.5"
Ports:
1.5" FPT
or 2"
Weight:
11lbs.
Run time:
six
hours minimum
Circulation system flow rate:
25-120 gpm (inline)
Cartridge flow rate:
10-18 gpm (internal bypass)
Cartridge selection:
(three sizes available)
10,000 - 25,000 gals
25,000 - 30,000 gals
35,000 - 45,000 gals
Cartridge dimensions: 13.75"x4.63"
Installation:
after filter, before or after
heater, and always before any chemical dispenser
Aboveground or Inground Pools
Now, Nature2 is available for your pool. That means you
can experience a revolutionary new approach to sanitizing your
in-ground or aboveground pool that gives you the purest, clearest
water imaginable. The patented Nature2 sanitizer uses
minerals to destroy bacteria and algae. Just drop Nature2
CF into your cartridge filter, activate the sanitizer and let it do
the rest for four months. Then, just sit back and start experiencing
a more refreshing pool. The
benefits of Nature2 are easy to see. Using a
Nature2 sanitizer means you can reduce chlorine use in
your pool to just 0.5ppm. And continuous use of Nature2
in your pool will mean less suspended matter and a more consistent
pH balance. Just think—Nature2 reduces the potential for
stinging eyes, skin irritation and unpleasant odors. Maintaining a
pool with Nature2 is much simpler than using traditional
chemical treatments. The Nature2 sanitizer works
automatically and requires no electricity. Pool owners who have
switched from
chemical programs happily report that they are now spending
considerably less time maintaining their pools with Nature2.
This means more time for you to enjoy your pool and its fresh, clear
water.
How does
Nature2 CF work? Water flows
through the Nature2 CF sanitizer which contains a layer
of minerals which traps bacteria and algae. The sanitizer contains
no moving parts and is unaffected by heavy use, hot weather and
water temperature. It provides the ultimate in water sanitation for
your pool for four months.
Nature2
CF: A perfect fit for your cartridge filter. The Nature2
CF Pool sanitizer drops into the cartridge filter of your in-ground
or aboveground pool up to 25,000 gallons. When you place a Nature2
CF into your filter and activate the sanitizer, you'll see and feel
the exhilarating difference in water quality.
There are no changes
to your system and no installation costs. It's that easy.
or when using
non-chlorine shock products...Tests for non-chlorine, pH and Total
Aklalinity
Quickest and easiest way to test spa water for
Monopersulfate (shock), PH and Alkalinity.
Simply dip strip into water, then compare colors on strip to those on the
bottle. It's that easy ! Say goodbye to those messy dropper bottles forever
!
Monopersulfate is
an oxidizing agent used in mineral purification systems such as Frog®,
SpaFrog®, Nature2®, PoolRx™, or SpaRx™.*
Just dip an AquaChek Monopersulfate strip in your pool or spa water for one
second and remove it immediately. You get test results in seconds!
To keep your pool at its best, test at each end a minimum of twice a week,
and test your spa before each use. It’s also a good idea to write down your
results each time you test.
Comes with complete instructions. 50 strips per bottle.
AquaChek Monopersulfate has added directions in 15 Languages to the product
insert! English, French, Spanish, Italian, Czech, Danish, Dutch, German,
Greek, Hungarian, Polish, Portuguese, Russian, Swedish and Turkish.
Monopersulfate is a strong oxidizer capable of eliminating contaminants from
your pool or spa (hot tub). It can help you to maintain crystal clear water.
Our AquaChek™ test strip measures Monopersulfate in the approximate range of
400 – 7,000 ppm (mg/L). The presence of chlorine or bromine may increase the
reading of this strip.
You can use monopersulfate in
two different ways:
If the primary sanitizer in
your pool or spa is chlorine or bromine, you can use monopersulfate as a
shock chemical. This is something you do periodically when the
contaminants have accumulated to a high level in the water. To shock the
water, you raise the monopersulfate to a high level for a short period of
time. It will oxidize (destroy) the contaminants that have accumulated in
the water, helping your sanitizer get “caught up” with its job. Once the
monopersulfate dissipates, the chlorine or bromine will resume destroying
low levels of contaminants.
You can also use
monopersulfate in some alternate sanitizing systems in place of chlorine
or bromine, although it still recommended that you maintain a minimal
amount of one of those two in the water. Monopersulfate is used in several
different mineral purification systems such as Nature2 and
Frog®. In this case, you should test the water frequently to ensure that
your water has a proper level of monopersulfate. Consult the chemical
manufacturer’s recommendation concerning the amount you should add to your
water.
For more detailed advice on the
chemical treatment of your pool or spa, contact a pool care professional.
pH
We use pH as an index to
express how acidic or basic a solution is. (The scientific definition
of pH is “the negative logarithm of the hydrogen ion concentration”.)
A pH greater than 7.0 is basic, and a pH lower than 7.0 is acidic. In
pools and spas, it is important to maintain the water in the slightly
basic range of 7.2 to 7.8. The National Spa and Pool Institute (NSPI),
the industry association in the United States, has set a standard of
7.2 to 7.6 as the ideal pH.
If pH Is Low:
The water can corrode surfaces, metal equipment or fixtures.
Swimmers and bathers can experience discomfort from burning
eyes and itchy skin.
The chlorine may dissipate more quickly.
The water may cause pitting and etching of plaster surfaces.
If pH Is High:
Calcium and metals tend to come out of solution (the opposite
of dissolving) at high pH levels, creating the potential for
staining and scale formation. The calcium and metals will actually
create deposits and discoloration on pool walls and equipment.
Swimmers and bathers can experience discomfort from burning
eyes and itchy skin.
High pH can contribute to cloudy water.
Alkalinity
Total alkalinity is the
measure of the amount of alkaline buffers (primarily carbonates
and bicarbonates) in your water. These alkaline substances
buffer the water against sudden changes in pH. Total alkalinity
is considered the key to water balance. It is the first
parameter you should balance when making routine adjustments to
your water.
If you neglect to check the total alkalinity in your pool or
spa, you may have trouble balancing the pH. You may also notice
that pH fluctuates suddenly despite your best efforts to keep it
in the ideal range. If the alkalinity is too low, anything
introduced to the water will have an immediate impact on pH.
Abrupt shifts in pH can cause scaling or corrosion of metal
equipment and fixtures as well as other problems. When the total
alkalinity is high, the pH has a tendency to drift upward,
causing scale to form.
Maintaining an ideal level of alkalinity will protect your pool
or spa and its equipment from the harmful effects of sudden pH
fluctuations. Think of the alkalinity as training wheels: it
keeps the pH in balance without allowing it to tip too far to
either side. Of course the pH can still drift upward or
downward, but that change will happen gradually as long as the
alkalinity falls within the ideal range. The ideal range of
total alkalinity for pools and spas is between 80 and 120 ppm
(mg/L).
When the total alkalinity is too low, add sodium bicarbonate. If
the total alkalinity is too high, you can lower it by using
muriatic acid or sodium bisulfate.
Tests for Total Bromine, Total
Hardness, pH and
Total Alkalinity
Just dip an AquaChek Red strip in
your spa (hot tub) or pool water for one second and remove it immediately.
You get test results in seconds!
To keep your spa at its best, test the water before each use. (Two bathers
in a 400-gallon spa are the equivalent of 150 swimmers in a 20,000-gallon
pool!) Test your pool at each end a minimum of twice a week. It’s also a
good idea to write down your results each time you test.
Comes with complete instructions. 50 strips per bottle.
AquaChek Red has added directions in 15 Languages to the product insert!
English, French, Spanish, Italian, Czech, Danish, Dutch, German, Greek,
Hungarian, Polish, Portuguese, Russian, Swedish and Turkish.
pH
We use pH as an index to
express how acidic or basic a solution is. (The scientific definition of
pH is “the negative logarithm of the hydrogen ion concentration”.) A pH
greater than 7.0 is basic, and a pH lower than 7.0 is acidic. In pools
and spas, it is important to maintain the water in the slightly basic
range of 7.2 to 7.8. The National Spa and Pool Institute (NSPI), the
industry association in the United States, has set a standard of 7.2 to
7.6 as the ideal pH.
If pH Is Low:
The water
can corrode surfaces, metal equipment or fixtures.
Swimmers and
bathers can experience discomfort from burning eyes and itchy skin.
The chlorine
may dissipate more quickly.
The water
may cause pitting and etching of plaster surfaces.
If pH Is
High:
Calcium and
metals tend to come out of solution (the opposite of dissolving) at
high pH levels, creating the potential for staining and scale
formation. The calcium and metals will actually create deposits and
discoloration on pool walls and equipment.
Swimmers and
bathers can experience discomfort from burning eyes and itchy skin.
High pH can
contribute to cloudy water.
For more detailed advice on the specific chemical treatment for your
pool or spa, contact your dealer.
Alkalinity
Total alkalinity is the
measure of the amount of alkaline buffers (primarily carbonates and
bicarbonates) in your water. These alkaline substances buffer the
water against sudden changes in pH. Total alkalinity is considered
the key to water balance. It is the first parameter you should
balance when making routine adjustments to your water.
If you neglect to check the total alkalinity in your pool or spa,
you may have trouble balancing the pH. You may also notice that pH
fluctuates suddenly despite your best efforts to keep it in the
ideal range. If the alkalinity is too low, anything introduced to
the water will have an immediate impact on pH. Abrupt shifts in pH
can cause scaling or corrosion of metal equipment and fixtures as
well as other problems. When the total alkalinity is high, the pH
has a tendency to drift upward, causing scale to form.
Maintaining an ideal level of alkalinity will protect your pool or
spa and its equipment from the harmful effects of sudden pH
fluctuations. Think of the alkalinity as training wheels: it keeps
the pH in balance without allowing it to tip too far to either side.
Of course the pH can still drift upward or downward, but that change
will happen gradually as long as the alkalinity falls within the
ideal range. The ideal range of total alkalinity for pools and spas
is between 80 and 120 ppm (mg/L).
When the total alkalinity is too low, add sodium bicarbonate. If the
total alkalinity is too high, you can lower it by using muriatic
acid or sodium bisulfate.
Bromine
Bromine is a popular
pool and spa sanitizer often used instead of chlorine. Bromine
has some distinct differences from chlorine. One advantage is
that bromine works better for spas / hot tubs (with hotter water
and lower water volume) than chlorine does. On the minus side,
bromine is sensitive to sunlight, deteriorating rapidly when
exposed to the sun. It can also be more expensive than chlorine.
For these reasons, bromine is less popular than chlorine for use
in outdoor pools.
There are two forms of bromine, free and combined. Together
these two are called total bromine. Both forms of bromine are
sanitizers, meaning that they can kill bacteria, algae or other
living organisms in the water. Be sure to use a test kit that
measures total bromine, since that is the best indicator of the
level of sanitizer in your water. The ideal concentration of
total bromine in a swimming pool is 3 to 5 ppm. The ideal in a
hot tub or spa is 4 to 6 ppm. (In spas the level should be
slightly higher level due to the smaller volume and the higher
temperature of the water.)
You have to monitor the bromine level continually, almost daily,
as it will fluctuate constantly. Environmental conditions
(leaves, rain) and usage (how many folks are enjoying the pool
or spa) will add contaminants in the water. Those contaminants
will decrease the bromine existing in the water. Be sure to test
the bromine before entering the water. Even if the system is
dormant or not in use, you should test the bromine level at
least weekly to prevent any build-up of bacteria or algae.
Hardness
Water hardness
occurs as an indirect side effect of various chemical
compounds. Calcium and magnesium are the two primary
minerals that make up hardness in water. Like alkalinity and
pH, hardness affects the tendency of the water to be
corrosive or scale-forming. (Scale is a deposit that forms
on pool walls and equipment when the mineral content of the
water is too high.) By maintaining the ideal ranges for
hardness and alkalinity, you can keep scale formation to a
minimum.
Low hardness levels require immediate attention! They can be
very dangerous to your system. Water that is not properly
saturated with hardness—water in which the hardness level is
too low—will be very corrosive, causing significant damage
to metal pipes and fixtures as well as plaster. You must be
sure to balance hardness before adding any sanitizer to the
water. Otherwise, the water will become even more aggressive
(corrosive); it can cause severe damage in a short period of
time.
When the hardness level is low, increase the hardness
immediately to limit the damage of corrosive water. You can
increase the hardness level by adding a chemical like
calcium chloride. When the hardness level is too high,
excessive scale formation occurs, and the water may become
cloudy or discolored. Elevated pH and warmer temperatures
will increase scale build-up too. If the hardness level is
too high, you can partially drain and refill with fresh
water.
The ideal level of hardness for your pool or spa water is
from 200 – 400 ppm (mg/L). You should test hardness when
adding fresh water, and re-test until you have balanced the
water hardness properly. After that, test hardness a minimum
of once per month throughout the season. If you use calcium
hypochlorite as a sanitizer, you need to test more
frequently to ensure that the level has not exceeded the
upper limit.
Tests for Free Chlorine, pH, Stabilizer
(Cyanuric
Acid)
and Total Alkalinity
Just dip an AquaChek Yellow strip in
your pool or spa water for one second and remove it immediately. You get
test results in seconds!
To keep your pool at its best, test at each end a minimum of twice a week,
and test your spa before each use. It’s also a good idea to write down your
results each time you test.
Comes with complete instructions. 50 strips per bottle.
AquaChek Yellow has added directions in 15 Languages to the product insert!
English, French, Spanish, Italian, Czech, Danish, Dutch, German, Greek,
Hungarian, Polish, Portuguese, Russian, Swedish and Turkish.
Cyanuric Acid
(Stabilizer)
The sun’s ultraviolet (UV)
rays will make the chlorine in an outdoor pool dissipate quickly. In
fact, an ideal level of chlorine in an “unstabilized” pool or spa can
be lost in less than two hours on a bright sunny day, due to the UV
rays of the sun. Cyanuric acid acts as a “stabilizer” that helps
chlorine hold up better when exposed to the UV rays. You can think of
cyanuric acid as blocking the effect that the sunlight has on breaking
down the chlorine—kind of like a sunscreen for your pool.
You should maintain an ideal level of cyanuric acid, 30 to 50 ppm
(mg/L), to prevent rapid chlorine loss. If the cyanuric acid level is
too low, you may need to add more to the water. However, be advised
that cyanuric acid will make the pH of the water lower (more acidic),
so you may have to adjust the pH upward as well.
On the other hand, too much cyanuric acid will reduce the beneficial
effect of your chlorine, leading to stains or cloudy water. Some
chlorine compounds already contain an amount of cyanuric acid. If you
are using dichlor or trichlor as your primary chlorine sanitizer, you
are already introducing cyanuric acid along with the chlorine. If the
cyanuric acid level is your pool or spa is too high, you will need to
partially drain and refill with fresh water.
When you first fill your pool or spa, test the cyanuric acid level
until you have added enough to reach the ideal range. After that, test
cyanuric acid a minimum of once a month throughout the pool season. If
you are using dichlor or trichlor, you will have to test cyanuric acid
more frequently to ensure that the level has not exceeded the upper
limit.
Free Chlorine
Every sanitizer has two
key functions, to sanitize (kill bacteria and all living
organisms) and also oxidize (destroy contaminants and waste). The
most popular pool and spa sanitizer is chlorine. Chlorine is also
classified as a disinfectant, meaning that it is capable of
killing bacteria, algae and other organic material instantly. All
chlorine does the same thing when it is added to the water,
regardless of the type of chlorine added. It forms free available
chlorine. Free chlorine is the form of chlorine that kills
bacteria, algae and disease-causing organisms. It is the attack
dog that guards your pool against microbiotic intruders. (In
general, you wouldn’t want a dog in the pool, but this is an
exception.)
You must maintain free chlorine at a sufficient level to disinfect
potential contaminants on contact. The more chlorine in the water,
the more it can sanitize and oxidize the water. (Remember that
sanitizing and oxidizing are the processes that chlorine uses to
keep the water clear and clean.) However, if the free chlorine
level gets too high, it can make the water uncomfortable for
swimmers. The trick is to keep the free chlorine level in the
ideal range. In a swimming pool, keep free chlorine at a minimum
of 1 ppm (parts per million) and a maximum of 10 ppm, with an
ideal concentration of 1 to 3 ppm.
In spas the level needs to be maintained at a slightly higher
level due to the smaller volume and higher temperature. The
minimum level should be 2 ppm in a spa, again no higher than 10
ppm, and ideally 3 to 5 ppm.
pH
We
use pH as an index to express how acidic or basic a solution
is. (The scientific definition of pH is “the negative
logarithm of the hydrogen ion concentration”.) A pH greater
than 7.0 is basic, and a pH lower than 7.0 is acidic. In pools
and spas, it is important to maintain the water in the
slightly basic range of 7.2 to 7.8. The National Spa and Pool
Institute (NSPI), the industry association in the United
States, has set a standard of 7.2 to 7.6 as the ideal pH.
If pH Is Low:
The water can corrode surfaces, metal equipment or
fixtures.
Swimmers and bathers can experience discomfort from
burning eyes and itchy skin.
The chlorine may dissipate more quickly.
The water may cause pitting and etching of plaster
surfaces.
If pH Is High:
Calcium and metals tend to come out of solution (the
opposite of dissolving) at high pH levels, creating the
potential for staining and scale formation. The calcium and
metals will actually create deposits and discoloration on
pool walls and equipment.
Swimmers and bathers can experience discomfort from
burning eyes and itchy skin.
High pH can contribute to cloudy water.
Alkalinity
Total alkalinity is the measure of the amount of alkaline
buffers (primarily carbonates and bicarbonates) in your
water. These alkaline substances buffer the water against
sudden changes in pH. Total alkalinity is considered the
key to water balance. It is the first parameter you should
balance when making routine adjustments to your water.
If you neglect to check the total alkalinity in your pool
or spa, you may have trouble balancing the pH. You may
also notice that pH fluctuates suddenly despite your best
efforts to keep it in the ideal range. If the alkalinity
is too low, anything introduced to the water will have an
immediate impact on pH. Abrupt shifts in pH can cause
scaling or corrosion of metal equipment and fixtures as
well as other problems. When the total alkalinity is high,
the pH has a tendency to drift upward, causing scale to
form.
Maintaining an ideal level of alkalinity will protect your
pool or spa and its equipment from the harmful effects of
sudden pH fluctuations. Think of the alkalinity as
training wheels: it keeps the pH in balance without
allowing it to tip too far to either side. Of course the
pH can still drift upward or downward, but that change
will happen gradually as long as the alkalinity falls
within the ideal range. The ideal range of total
alkalinity for pools and spas is between 80 and 120 ppm
(mg/L).
When the total alkalinity is too low, add sodium
bicarbonate. If the total alkalinity is too high, you can
lower it by using muriatic acid or sodium bisulfate.
Tests
for concentrations of salt in your pool. Great for pools using salt
generators to keep them running at optimum performance. 10 strips/bottle.
Aquachek
White, Salt Test Strips - The Quick, easy way to test your pool water!
No more
vials, reagents and messy drops. Use Aqua Chek's Simple, yet accurate test
strips instead of that complicated liquid test kit. Just dip and read the
results in 30 seconds.
AquaChek's White Salt Test Strip tests for: Sodium Chloride with advanced
precision (Salt)
For more detailed advice on the
chemical treatment of your pool or spa, contact a pool care professional.
Nature 2 Owners
Manual For aboveground Pools
Maintaining
a pool with Nature2 is much simpler than using
traditional chemical treatments. The Nature2 sanitizer
works automatically and requires no electricity. Pool owners who
have switched from chemical programs happily report that they are
now spending considerably less time maintaining their pools with
Nature2. This means more time for you to enjoy your pool
and its fresh, clean water. 
